In home decoration, floor leveling is a crucial step in floor renovation. Only when the ground base is properly treated can the construction on top be more stable. How to level the floor? Let's introduce the price and construction process of self-leveling floor leveling.

Self-leveling floor leveling construction process

01 Ground polishing treatment

Before using self-leveling cement for floor leveling, it is necessary to carry out pretreatment on the floor first. Generally, there will be protruding areas on the rough floor, which need to be polished away. Typically, a floor polisher is used to grind the protrusions down using a rotary flat grinding method.

02 Apply bonding agent

The role of bonding agent is to enable the self-leveling cement to bond more tightly with the ground. After the ground polishing and cleaning steps are completed, it is necessary to apply two coats of bonding agent on the polished and leveled ground. There are many types of bonding agent products on the market, and homeowners should pay attention to choosing products of good quality to prevent various quality issues from arising on the ground in the later stages.

03 Self-leveling cement

Self-leveling cement is a dry-mixed powder material composed of various active ingredients, which can be used on-site by mixing with water. Typically, the ratio of self-leveling cement to water is 1:2. Ensure that the cement is fluid, but not too thin, otherwise it may lack strength after drying and become prone to dusting. After the bonding agent dries, the mixed self-leveling cement can be poured onto the floor. Once poured, the cement can flow along the floor, but it may not level completely. Construction personnel need to use tools to push and level the cement.

04 Use a roller to evenly press the cement

Cement is not a pure liquid and cannot be absolutely flat. During the pushing and rolling process, there may be some unevenness. At this time, it is necessary to use a roller to press the cement evenly. If this step is omitted, it is easy to cause local unevenness on the ground and problems such as small local voids in the later stages. Step 5: Avoid leaving marks during construction. During construction, it is inevitable for construction workers to step on the cement surface. To ensure that their shoes do not leave marks on the cement, construction workers generally wear special shoes for construction. The soles of these shoes are covered with nails, which do not affect stability and can also reduce the likelihood of leaving marks on the cement surface.

05 Maintenance

The self-leveling flooring dries quickly, and wooden floors can usually be laid after three days. However, during the three days before it dries, it is necessary to protect the finished product.

01 Ground polishing treatment

Before using self-leveling cement for floor leveling, it is necessary to first carry out pre-treatment on the floor. Generally, there will be protruding areas on the rough floor, which need to be polished away. Typically, a floor polisher is used to grind the protrusions down using a rotary flat grinding method.

02 Apply bonding agent

The role of bonding agent is to enable the self-leveling cement to bond more tightly with the ground. After the ground grinding and cleaning steps are completed, it is necessary to apply two coats of bonding agent on the ground that has been ground and leveled. There are many types of bonding agent products on the market, and homeowners should pay attention to choosing products of good quality to prevent various quality issues from arising on the ground in the later stages.

03 Self-leveling cement

Self-leveling cement is a dry-mixed powder material composed of various active ingredients, which can be used on-site by mixing with water. Typically, the ratio of self-leveling cement to water is 1:2. Ensure that the cement is fluid, but not too thin, otherwise it may lack strength after drying and become prone to dusting. After the bonding agent dries, the mixed self-leveling cement can be poured onto the floor. Once poured, the cement can flow along the floor, but it may not level completely. Construction personnel need to use tools to push and level the cement.

04 Use a roller to evenly press the cement

Cement is not a pure liquid and cannot be absolutely flat. During the pushing and rolling process, there may be some unevenness. At this time, it is necessary to use a roller to press the cement evenly. If this step is omitted, it is easy to cause local unevenness on the ground and problems such as small areas of lifting in the later stages. Step 5: Avoid leaving marks during construction. During construction, it is inevitable for construction workers to step on the cement surface. To ensure that their shoes do not leave marks on the cement, construction workers generally wear special shoes for construction. The soles of these shoes are covered with nails, which do not affect their stability and can also reduce the likelihood of leaving marks on the cement surface.

05 Maintenance

The self-leveling compound dries quickly, and wooden floors can usually be laid after three days. However, during the three days before it dries, it is necessary to protect the finished product.